Penerapan Alat Ukur Tinggi Badan Otomatis Berbasis Arduino sebagai Inovasi Pelayanan Kesehatan Masyarakat Desa
DOI:
https://doi.org/10.29408/jt.v4i1.34011Keywords:
Arduino, Automatic Height Measurement Device, Community Service, Ultrasonic SensorAbstract
Height measurement is an important activity in community health services, particularly for growth monitoring and anthropometric data collection. However, manual height measurement processes often face challenges such as time inefficiency, potential reading errors, and inconsistent measurement results. This community service activity aims to implement an automatic height measurement device based on Arduino Uno and an ultrasonic sensor as a simple technological solution to support community health service activities during the Community Service Program (PENGABDIAN KEPADA MASYARAKAT) in Pringgasela Selatan Village. The implementation method includes device design, system assembly, functional testing, and direct application of the device in community service activities. The results show that the automatic height measurement device provides relatively consistent measurement results compared to manual methods and simplifies the measurement process by delivering quick and easily readable outputs. The application of this device also improves the efficiency of health service activities and supports the provision of more practical measurement data. Therefore, the Arduino-based automatic height measurement device can be utilized as a supporting tool for community health services using simple technology.
References
Aji, G. M., Pratiwi, A. F., & Utami, S. W. (2024). Rancang Bangun Inkubator Tempe Untuk Mempercepat Waktu Fermentasi. Agroteknika, 7(4), 488–497. https://doi.org/10.55043/agroteknika.v7i4.321
Gokhale, P., Bhat, O., & Bhat, S. (2007). Introduction to IOT. International Advanced Research Journal in Science, Engineering and Technology ISO, 3297(1). https://doi.org/10.17148/IARJSET.2018.517
Implementasi_Dan_Perancangan_Pengukur_Ti. (n.d.).
Maulana, L., & Yendri, D. (2018). Rancang Bangun Alat Ukur Tinggi dan Berat Badan Ideal Berdasarkan Metode Brocha Berbasis Mikrokontroler. JITCE (Journal of Information Technology and Computer Engineering), 2(02), 76–84. https://doi.org/10.25077/jitce.2.02.76-84.2018
Perwita Sari, M., & Rhezza Pratama, N. (n.d.). Application Internet of Things (IoT) in Healthcare to Optimize Waiting Time Using the Business Process Reengineering (BPR) Approach.
Perwita Sari, M., & Septarini, S. (2025a). Optimasi Proses Fermentasi Tempe Berbasis IoT dalam Mengurangi Produk Cacat Menggunakan Pendekatan Lean Manufacturing dan Value Stream Mapping. Jurnal PRINTER: Jurnal Pengembangan Rekayasa Informatika Dan Komputer, 3(2), 128–132. https://doi.org/10.29408/jprinter.v3i2.33203
Perwita Sari, M., & Septarini, S. (2025b). Optimasi Proses Fermentasi Tempe Berbasis IoT dalam Mengurangi Produk Cacat Menggunakan Pendekatan Lean Manufacturing dan Value Stream Mapping. Jurnal PRINTER: Jurnal Pengembangan Rekayasa Informatika Dan Komputer, 3(2), 128–132. https://doi.org/10.29408/jprinter.v3i2.33203
Utama Putra, I., Bakri, M., & Darwis, D. (2021). Pengukur Tinggi Badan Digital Ultrasonik Berbasis Arduino Dengan Lcd Dan Output Suara. Jurnal Teknik Dan Sistem Komputer (JTIKOM), 2(2).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Mutia Perwita Sari, Tatang Hidayatullah, Allauddin Al-Afghani, Waldi Sholistiawan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright & License
Copyright
Authors published in this journal agree to the following terms:
- The copyright of each article is retained by the author (s) without restrictions
- The journal allows the author(s) to retain publishing rights without restrictions
- The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
- Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal
- Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work
- Articles and all related material published are distributed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
License
Teknokrat: Teknologi Informasi untuk Masyarakat is licensed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
You are free to :
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially
Under the following terms :
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
