Pengenalan dan Pelatihan Teknologi Internet Of Things Dan Robotika Bagi Siswa Sekolah Menengah Kejuruan
DOI:
https://doi.org/10.29408/jt.v4i1.35008Keywords:
Internet of Things, Robotics, PKM, SMK NWDI Wanasaba, PLAAbstract
This Community Service (PKM) activity is entitled "Introduction and Training of Internet of Things (IoT) and Robotics Technology for NWDI Wanasaba Vocational High School Students" which is implemented using the Participatory Learning and Action (PLA) method. This activity is motivated by the need to improve student competency in facing the Industrial Revolution 4.0 era, where mastery of IoT and robotics is an important skill for both the industrial world and technology-based entrepreneurship. The PLA method was chosen because it emphasizes the active involvement of participants in the entire learning process through discussions, direct practice, and joint reflection. The stages of the activity include identifying partner needs, designing training materials, implementing practice-based training, to evaluating the results of the activity. Students are involved participatory in every stage, starting from the introduction of basic concepts of IoT and robotics, practicing assembling devices, simple programming, to testing applications in the context of everyday life and vocational fields. The results of the activity show that students gain increased knowledge, technical skills, and motivation to innovate in utilizing technology. Through this activity, three main outcomes were achieved: (1) increasing digital and technological literacy for students, (2) forming basic competencies in IoT and robotics that can be further developed, and (3) establishing collaboration between universities and schools in supporting the strengthening of vocational education. Thus, this PKM not only contributes to improving the quality of human resources in the NWDI Wanasaba Vocational School environment, but also becomes a strategic step in preparing the younger generation to face the challenges of the digital era.
References
Abdul Kadir, E., Syafitri, N., & Bagus Dwi Fikri, T. (2023). Pelatihan Dasar Arduino Untuk Robotika Cerdas Dengan Penerapan Teknologi Kecerdasan Buatan Untuk Sekolah Menengah. Jurnal Pengabdian Masyarakatdan Penerapan Ilmu Pengetahuan, 4(2), 22–28.
Ambarwati, R., Nuri Ati Ningsih, Sumani, & Dwi Fitriana. (2024). Penyusunan Buku Ajar Digital Pembelajaran Bahasa Inggris. International Journal of Community Service Learning, 8(1), 62–69. https://doi.org/10.23887/ijcsl.v8i1.75225
Candra Wardana, F., Atikawati, D., Nurrohman, M. Y., Abidin, Z., & Fahanani, A. F. (2023). Pelatihan Internet Of Things (Iot) Untuk Meningkatkan Kompetensi Siswa Smk Negeri 1 Kediri Dalam Menghadapi Era Industri 4.0. TEKAD : Teknik Mengabdi. https://doi.org/10.21776/ub.tekad.2022.02.2.4
Dwi Putra, M. T., Pradeka, D., Adiwilaga, A., Munawir, M., & Adjhi, D. P. (2023). Pelatihan Robotika Sebagai Upaya Meningkatkan Kompetensi Keahlian Siswa SMK Daarut Tauhiid Bandung. Jurnal Pengabdian UNDIKMA, 4(1), 56. https://doi.org/10.33394/jpu.v4i1.6516
Fajar Budi Hartanto, C. (2019). Tantangan Pendidikan Vokasi di Era Revolusi Industri 4.0 dalam Menyiapkan Sumber Daya Manusia yang Unggul. SEMINAR NASIONAL PASCASARJANA.
Putra, Y. K., Sadali, M., Fathurrahman, F., & Mahpuz, M. (2020). Pelatihan uji kompetensi keahlian siswa sekolah kejuruan menggunakan metode Participatory Learning and Action (PLA). ABSYARA: Jurnal Pengabdian Pada Masyarakat, 1(2), 46–52. https://doi.org/10.29408/ab.v1i2.2772
Putu, I., Nata, R., Yasana, W., Setiawan, K. A., Dandi, S. G., Sutamara, Y., Widiada, G. S., Bagus, I., & Mardana, P. (2021). Smart Project Educational Robot (SpaceR) Sebagai Robot Edukasi. JASINTEK, 3(1), 58–64.
Sudianto, A., Muhammad Djamaluddin, Lalu Kertawijaya, Jumawal, & Ida Wahidah. (2025). Pemanfaatan Sistem Absensi Berbasis RFID Sebagai Upaya Meningkatkan Akurasi dan Efisiensi Kehadiran Perangkat Desa di Aikmel Barat. Jurnal Teknologi Informasi Untuk Masyarakat, 3(2), 271–281. https://doi.org/10.29408/jt.v3i2.33147
Sutikno, T., Handayani, L., Purnama, H. S., & Wahono, T. (2024). Pengenalan dan pelatihan robotika untuk penerapan pada bidang kesehatan bagi siswa MTS/MA Muallimat Yogyakarta dan SMA Negeri 7 Yogyakarta. Senama, 1(1),
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2026 Aris Sudianto, Muhammad Wasil, Baiq Andriska Candra Permana, Muhamad Sadali
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright & License
Copyright
Authors published in this journal agree to the following terms:
- The copyright of each article is retained by the author (s) without restrictions
- The journal allows the author(s) to retain publishing rights without restrictions
- The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
- Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal
- Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work
- Articles and all related material published are distributed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
License
Teknokrat: Teknologi Informasi untuk Masyarakat is licensed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
You are free to :
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially
Under the following terms :
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
