Pengabdian Masyarakat: Solusi Penyedot Asap Blower Otomatis untuk Lombok Center IT

Authors

  • taufik akbar Universitas Hamzanwadi
  • Intan Komala Dewi P Universitas Hamzanwadi

Abstract

Solder is a heating tool used to melt tenol so that it can be used to connect the component legs to the PCB (printed circuit board). The smoke that arises when soldering contains lead (Pb), this is because tenol solder is a mixture of 63% tin and 36% lead. Lead (Pb) is a heavy metal that is very dangerous for the human body. Lead exhibits toxic properties to the nervous system, hemetologic, hemetotoxic and affects kidney function. For this reason, we need a tool that is able to suck in the smoke resulting from the soldering process and filter it so that it is not harmful to the body. The process of making a prototype of this tool goes through four stages, namely literature study, tool design, tool making and tool realization. The design of the prototype of this tool is divided into making exhaust chimneys, sensors and controllers. The sensor part of this tool uses MQ-2. The sensor readings will be processed by the Arduino Uno microcontroller which then sends the message to the relay, then the relay will turn on the PC fan to suck up the solder fumes that arise.

References

Fiolana, F. A. (2013). PERANCANGAN ALAT PENJERNIH UDARA RUANG TERTUTUP MENGGUNAKAN MIKROKONTROLER AT89S51. Jurnal Cendekia Vol, 11(1).

Nugraha, F. (2021). PERANCANGAN SISTEM PEMADAM API DAN PENGHISAP ASAP OTOMATIS BERBASIS ARDUINO MEGA DENGAN KENDALI ANDROID (Doctoral dissertation, Universitas Islam Kalimantan MAB).

Pradiansyah, D. H., Kurniawan, W., & Syauqy, D. (2019). Sistem Kontrol Kecepatan Motor Exhaust Fan Pada Cooking Hood Menggunakan Metode Fuzzy. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 3(8), 8012-8017.

Rasyid, A., Junus, M., Fatachul, A., Ludiyah, B. A., & Fitri, M. A. (2020). PENGATURAN PERANGKAT EXHAUST PADA RUANG MEROKOK MENGGUNAKAN WIRELESS SENSOR NETWORK. Jurnal Teknik Ilmu Dan Aplikasi, 1(2), 100-107.

Setiawan, A., Irawan, B. P., & Suhaini, E. (2023). Anggaran Biaya Pembuatan Mesin Penghisap Asap Pengelasan. Jurnal Teknik Mesin, 9(1), 9-18.

Syarif, S. (2018). Penghisap Udara Otomatis Pada Kebocoran Pipa Gas Dalam Ruangan Tertutup. JURNAL IT: Media Informasi STMIK Handayani Makassar, 8(3).

Wahyudi, B. A., & Edy, D. L. (2020). Automation of Welding Fumes based on MQ-2 Sensor in Welding Laboratory. Jurnal Temapela, 3(1), 1-9.

Wiratama, R. A., Rakiman, R., & Sunitra, E. (2019). Perakitan Sensor Asap Pada Alat Penyaring Asap Untuk Mengontrol Fan Secara Otomatis. Jurnal Teknik Mesin, 12(1), 6-9.

Yanuar, R. N., Ichsan, M. H. H., & Setyawan, G. E. (2019). Implementasi Sistem Pemadam Kebakaran Pada Ruang Tertutup Berbasis Arduino Menggunakan Logika Fuzzy. Jurnal Pengembangan Teknologi Informasi Dan Ilmu Komputer, 3(4), 3963-3970.

Downloads

Published

2023-06-30

How to Cite

akbar, taufik, & Komala Dewi P, I. (2023). Pengabdian Masyarakat: Solusi Penyedot Asap Blower Otomatis untuk Lombok Center IT. Jurnal Teknologi Informasi Untuk Masyarakat, 1(1), 15–21. Retrieved from https://e-journal.hamzanwadi.ac.id/index.php/teknokrat/article/view/23118

Issue

Vol. 1 No. 1 (2023): Jurnal Teknologi Informasi untuk Masyarakat (Teknokrat)

Section

Articles

License

Copyright & License

Copyright

Authors published in this journal agree to the following terms:

  • The copyright of each article is retained by the author (s) without restrictions
  • The journal allows the author(s) to retain publishing rights without restrictions
  • The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
  • Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal
  • Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work
  • Articles and all related material published are distributed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).

License

Teknokrat: Teknologi Informasi untuk Masyarakat is licensed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).

You are free to :

Share — copy and redistribute the material in any medium or format

Adapt — remix, transform, and build upon the material for any purpose, even commercially

Under the following terms :

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.