Pendampingan Pembuatan Bak Sampah Otomatis Berbasis Teknologi Internet of Things (IoT) Untuk Kantor Desa Aikmel Timur
Keywords:
Buzzer, Servo MotorAbstract
Waste is a common issue in daily life that requires serious attention to be managed effectively. At the Aikmel Timur Village Office, waste management plays a crucial role in maintaining cleanliness and comfort in the work environment. To raise awareness among all village office staff about the importance of environmental cleanliness, a different approach is needed to encourage them to dispose of waste properly and orderly. Traditional trash bins often rely on manual systems to open, which can be inconvenient, especially when both hands are occupied or the system is unhygienic. As part of an internship program, I contributed to developing an innovation in the form of an Internet of Things (IoT)-based automatic trash bin. This innovation utilizes Arduino Uno and integrates key components such as the HC-SR04 sensor, servo motor, buzzer, and an adapter circuit. The HC-SR04 sensor detects the presence of waste intended for disposal, the servo motor serves as an automatic mechanism to open and close the bin, and the buzzer acts as an audio indicator to notify users that the system is active and ready for use. The development method began with identifying problems through a survey of workplace needs, followed by system design and implementation, as well as functional evaluation and benefit analysis. The result of this innovation is the creation of an automatic trash bin that not only facilitates waste disposal but also raises awareness about the importance of maintaining environmental cleanliness. Through this internship activity, it is hoped that this innovation can serve as a model to be widely implemented in villages, supporting better waste management practices.
Keywords: Arduino Uno , buzzer, waste management, HC-SR04 sensor, servo motor.
References
Febriani, Yuyun, Muhlisun Azim, Arief Rafsanjani, Leny Ramadhan, and Baiq Risma. 2024. “Edukasi Dan Pendampingan Pengelolaan Sampah Anorganik Berprinsip Zero Waste System Di Desa Bagik Payung Selatan Kecamatan Suralaga.” 2(1):36–44.
Purnama, Iwan, Syaiful Zuhri Harahap, and Ali Akbar Ritonga. 2020. “Rancang Bangun Tempat Sampah Otomatis Pada Universitas Labuhanbatu.” Jurnal Informatika 8(2):81–84. doi: 10.36987/informatika.v8i2.1780.
Zuraidah, Zuraidah, Lu’lu’ Nur Rosyidah, and Rully Fahrial Zulfi. 2022. “Edukasi Pengelolaan Dan Pemanfaatan Sampah Anorganik Di Mi Al Munir Desa Gadungan Kecamatan Puncu Kabupaten Kediri.” Budimas : Jurnal Pengabdian Masyarakat 4(2):1–6. doi: 10.29040/budimas.v4i2.6547.
Harianto, Aris Sudianto, Muhammad Wasil, Muhamad Sadali, and Baiq Andriska Candra. 2024. “Pelatihan Dan Pendampingan Instalasi Jaringan Internet Untuk Peningkatan Pelayanan Pada Kantor Desa.” 2(1):52–60.
Baiq Andriska Candra Permana, Muhammad Sadali, Aris Sudianto, Harianto, and Lalu Kerta Wijaya. 2024. “Sistem Kendali Perangkat Listrik Dan Monitoring Daya Listrik Berbasis Internet Of Things.” Infotek: Jurnal Informatika Dan Teknologi 7(2):544–51. doi: 10.29408/jit.v7i2.26534.
Hadian Mandala Putra, M. Nuzuluddin, Taufik Akbar, and Ahwan Ahmadi. 2024. “Pelatihan Internet of Things ( IoT ) Guna Meningkatkan Kompetensi Siswa SMKN 1 Pringgabaya.” 2(1):27–35.
Imam Abdul Rozaq, and Noor Yulita Dwi. 2023. “Pengembangan Tempat Sampah Otomatis Berbasis Internet of Things (IoT) Untuk Pengelolaan Sampah Logam Dan Non-Logam.” JEECOM Journal of Electrical Engineering and Computer 5(2):250–57. doi: 10.33650/jeecom.v5i2.6908.
Rano Agustino, Moh Ikhsan Saputro, Handa Gustiawan, and M. Amin Sakaria. 2024. “Inovasi Pengelolaan Sampah : Tempat Sampah Pintar Berbasis IoT Di Penerapan IT Dalam Pengelolaan Sampah . Tempat Sampah Ini Dapat Mendeteksi Tingkat Museum , Tetapi Juga Bagi Pengunjung Dan Lingkungan . Pengunjung Akan Mendapatkan.” 10(1):309–25.
Ricky Zulham Pahlawan, Fakultas Teknologi Informasi, Universitas Budi Luhur, and Jakarta Selatan. 2023. “Dengan Sensor Ultrasonik Dan Inframerah Menggunakan Wemos D1r2 Prototype Of An Automatic Iot-Based Trash Bin System With Ultrasonic And Infrared Sensors Using Wemos D1r2.” 2(September):2074–81
Hani Dewi Ariessanti, Martono, and Joko Widiarto. 2019. “Sistem Pembuangan Sampah Otomatis Berbasis IOT Menggunakan Mikrokontroler Pada SMAN 14 Kab.Tangerang.” CCIT Journal 12(2):229–40. doi: 10.33050/ccit.v12i2.694.
Gunawan, Indra, Imam Fathurahman, Muhammad Wasil, and Vol No. 2024. “Infotek : Jurnal Informatika Dan Teknologi Rancang Bangun Aplikasi Pendeteksi Golongan Darah Dan Rhesus Berbasis Internet Of Things Infotek : Jurnal Informatika Dan Teknologi Perkembangan Teknologi Diera Globalisasi Ini Telah Mengalami Kemajuan Yang Sanga.” 7(2):489–99.
Daffa Rizki Putra Noordi, Irfan Agus Prastowo, Muhammad Aqsha Rizki Sugiarto, and Dwi Hartanti. 2022. “Perancangan Tempat Sampah Otomatis Berbasis Arduino.” Hexatech: Jurnal Ilmiah Teknik 1(2):51–54. doi: 10.55904/hexatech.v1i2.343.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Taupik Hidayat, Lidiya, Aris Sudianto, Nurhidayati
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright & License
Copyright
Authors published in this journal agree to the following terms:
- The copyright of each article is retained by the author (s) without restrictions
- The journal allows the author(s) to retain publishing rights without restrictions
- The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
- Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal
- Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work
- Articles and all related material published are distributed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
License
Teknokrat: Teknologi Informasi untuk Masyarakat is licensed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
You are free to :
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially
Under the following terms :
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
