Sistem Pengelolaan Sampah Berbasis Teknologi: Studi Desain Bak Sampah Otomatis Berbasis Arduino Sebagai Upaya Pengabdian Masyarakat
DOI:
https://doi.org/10.29408/jt.v3i2.28773Keywords:
Automated Trash Bin, Arduino, Waste Management, Ultrasonic SensorAbstract
The issue of waste has become one of the most important concerns worldwide, requiring serious attention from all segments of society. This is due to the increasing volume of waste along with the growing population. Many villages face major problems in terms of ineffective waste management systems and the low public awareness regarding waste management, especially in the Surabaya Village Office, East Lombok Regency, which negatively impacts health and the comfort of public spaces. The Surabaya Village Office, as a public service center, plays an important role in creating a clean, healthy, conducive, and productive work environment. An effort to modernize conventional waste management in the Surabaya Village Office is by designing an automatic trash bin system based on Arduino using ultrasonic sensors to automatically open and close the trash bin. This aims to avoid direct physical contact and unpleasant odors. The utilization of Arduino technology provides an innovative solution for waste management. The results of the innovation in making an automatic trash bin using Arduino can improve the effectiveness and efficiency of waste management in the Surabaya Village Office
References
Amri Muliawan Nur, Hariman Bahtiar, Yahya, Nurhidayati, Almi Yulistia Alwanda, & Amir Bagja. (2024). Pelatihan Jaringan Berbasis Mikrotik Untuk Peningkatan Kompetensi Siswa kelas XI di SMKN 1 Pringgasela. Jurnal Teknologi Informasi Untuk Masyarakat, 2(2), 115–127. https://doi.org/10.29408/jt.v2i2.28380
Annita, Ricky Firmansyah, and Rizal Rachman. (2016). Tempat Sampah Pintar Berbasis Atmega328 Menggunakan Sensor Ultrasonik PIR dan Modul Gsm. 1–8.
Bere, S. H., Mahmudi, A., & Sasmito, A. P. (2021). Otomatis Menggunakan Sensor Jarak Berbasis Arduino. Jati, 5(1), 357–363.
Budianto, R. O., & Ghanistyana, L. P. (2024). Peran Komunikasi Politik dalam Kampanye Isu Lingkungan: Studi Kasus pada Kebijakan Pengelolaan Sampah di Indonesia. Jurnal Bisnis Dan Komunikasi Digital, 2(1), 11. https://doi.org/10.47134/jbkd.v2i1.3219
Fathurrahman, I., Djamaluddin, M., Hamzan Ahmadi, Siti Quthrotunnada, M.Yazid, Muh. Fathin Kautsar, & Ira Ayu Sekar Dadu. (2025). Pendampingan Pembuatan Tempat Sampah Otomatis Untuk Mendukung Kebersihan Kantor Desa Gelanggang. Jurnal Teknologi Informasi Untuk Masyarakat, 3(1), 1–12. https://doi.org/10.29408/jt.v3i1.28244
Hidayat, T., Lidiya, Aris Sudianto, & Nurhidayati. (2024). Pendampingan Pembuatan Bak Sampah Otomatis Berbasis Teknologi Internet of Things (IoT) Untuk Kantor Desa Aikmel Timur. Jurnal Teknologi Informasi Untuk Masyarakat, 2(2), 186–196. https://doi.org/10.29408/jt.v2i2.28610
Intan Paradita, L. (2018). Pemilahan Sampah: Satu Tahap Menuju Masyarakat Mandiri Dalam Pengelolaan Sampah. BERDIKARI : Jurnal Inovasi Dan Penerapan Ipteks, 6(2), 184–194. https://doi.org/10.18196/bdr.6245
Putra, A. M., Widiyanti, B. L. W., & Hartini, H. H. (2024). Pelatihan Daur Ulang Kantong Plastik dalam Mendukung Zero Waste School Pada Siswa MA Darul Muhsinin Desa Embung Kandong. Jurnal Teknologi Informasi Untuk Masyarakat, 2(2), 128–135. https://doi.org/10.29408/jt.v2i2.28391
Rizqi, P, M. (2014). Issn 1978-8096. EnviroScienteae, 10, 80–87.
Sandi, A. S., Yahya, Y., Dewi P, I. K., Yudha, P. S., & Paizurrohman, M. D. (2024). Pendampingan Teknologi Bak Sampah Otomatis untuk Meningkatkan Kebersihan Lingkungan di Kantor Desa Gelora. Jurnal Teknologi Informasi Untuk Masyarakat, 2(2), 197–205. https://doi.org/10.29408/jt.v2i2.28628
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Suhartini, Amri Muliawan Nur Muliawan Nur, Julaini, Zainul Hadi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright & License
Copyright
Authors published in this journal agree to the following terms:
- The copyright of each article is retained by the author (s) without restrictions
- The journal allows the author(s) to retain publishing rights without restrictions
- The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
- Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal
- Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work
- Articles and all related material published are distributed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
License
Teknokrat: Teknologi Informasi untuk Masyarakat is licensed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
You are free to :
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially
Under the following terms :
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
