Pendampingan Pembuatan Sistem Pengukuran Tinggi Badan Otomatis Berbasis Sensor Ultrasonik di Posyandu Desa Presak Sakra
DOI:
https://doi.org/10.29408/jt.v3i2.33157Keywords:
Community Service, Automatic Height Measurement Device, Arduino Uno, Health Service EfficiencyAbstract
This community service activity aims to assist Posyandu cadres in Presak Sakra Village in developing and utilizing an automatic height measurement system based on an ultrasonic sensor. The background of this program is the predominant use of manual measuring tools, which is less efficient, prone to reading errors, and often causes long queues when many toddlers are being served. The developed system employs an HC-SR04 ultrasonic sensor, an Arduino Uno R3 microcontroller, and a 16x2 LCD to display measurement results in real time, making the device more practical and easier to operate for Posyandu cadres. The implementation method includes hardware and software design, laboratory testing of the device, implementation at the Posyandu, training for cadres, and evaluation of system effectiveness in routine health services. Test results indicate that the device can measure body height with a deviation of 0 to 1 cm from the actual height, which is still acceptable for basic health services. In addition to improving efficiency and accuracy, this activity strengthens the role of higher education institutions in transferring appropriate technology and is expected to be replicated in other Posyandu to support improved quality of community health services.
References
Alfarisy, S., & Hadiwandra, T. Y. (2024). Rancang Bangun Alat Pengukur Tinggi Badan Berbasis IOT Dengan Sensor Ultrasonic dan Menggunakan Aplikasi BLYNK IOT. Jurnal Teknologi Informatika Dan Komputer, 10(2), 443–457. https://doi.org/10.37012/jtik.v10i2.2194
Amri Muliawan Nur, Hariman Bahtiar, Yahya, Nurhidayati, Almi Yulistia Alwanda, & Amir Bagja. (2024). Pelatihan Jaringan Berbasis Mikrotik Untuk Peningkatan Kompetensi Siswa kelas XI di SMKN 1 Pringgasela. Jurnal Teknologi Informasi Untuk Masyarakat, 2(2), 115–127. https://doi.org/10.29408/jt.v2i2.28380
Fathurrahman, I., Djamaluddin, M., Hamzan Ahmadi, Siti Quthrotunnada, M.Yazid, Muh. Fathin Kautsar, & Ira Ayu Sekar Dadu. (2025). Pendampingan Pembuatan Tempat Sampah Otomatis Untuk Mendukung Kebersihan Kantor Desa Gelanggang. Jurnal Teknologi Informasi Untuk Masyarakat, 3(1), 1–12. https://doi.org/10.29408/jt.v3i1.28244
Fathurrahman, I., Usma Wardani, I., Mu’Tashim, A., Pranata, A., Maulidi, D., Sholihah, H., Sabirin Haris, M., & Zulkipli. (2024). Pelatihan Microsoft Office untuk Meningkatkan Keterampilan Digital Remaja di Desa Menceh. Jurnal Teknologi Informasi Untuk Masyarakat, 2(2), 79–90. https://doi.org/10.29408/jt.v2i2.28189
Malinda, L., Kuantan Singingi, I., Jl Gatot Subroto, I. K., Nenas, K., Jake, D., & Kuantan Singingi, K. (2021). Perancangan Sistem Pengukur Tinggi Badan Otomatis Menggunakan Arduino Pada Uptd Puskesmas Peranap (Vol. 4, Issue 2).
Utama Putra, I., Bakri, M., & Darwis, D. (2021). Pengukur Tinggi Badan Digital Ultrasonik Berbasis Arduino Dengan Lcd Dan Output Suara. Jurnal Teknik Dan Sistem Komputer (JTIKOM), 2(2).
Yusa, M., Santoso, J. D., & Sanjaya, A. (2021). Implementasi Dan Perancangan Pengukur Tinggi Badan Menggunakan Sensor Ultrasonik. Pseudocode, 8(1), 90–97. https://doi.org/10.33369/pseudocode.8.1.90-97
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2025 Lalu Kerta Wijaya, imam fathurrahman, Hamzan Ahmadi, Muh. Kamarur Rijali Hilali, Yusril Hadi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright & License
Copyright
Authors published in this journal agree to the following terms:
- The copyright of each article is retained by the author (s) without restrictions
- The journal allows the author(s) to retain publishing rights without restrictions
- The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
- Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal
- Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work
- Articles and all related material published are distributed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
License
Teknokrat: Teknologi Informasi untuk Masyarakat is licensed under a Creative Commons Attribution- 4.0 International Public License (CC - BY 4.0).
You are free to :
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially
Under the following terms :
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
